Timeline

This page is changing almost daily as new info comes to my attention. If you see anything that is incorrect and can provide accurate sources, please contact me here. It is this page where it all starts. As new info falls into place on the timeline, I will try to provide more accurate info on all other pages in this site.

Dates Events
1946
  • 'With the help of an engineer in a tape recorder company' Willi Lorenz Stich, the man who will be eventually known as Bill Lawrence, builds his first magnetic guitar pickup, after not so successful attempts with connecting "a record player cartridge into the bridge of my guitar".
50's - 60's
  • Willi Lorenz Stich is a prominent Jazz guitarist in Germany. He lends one of his stage names of the time "Billy Lorento" to a line of guitars, pickups, and strings which he endorsed and designed with Framus, who have since owned the rights to that name.

back to top
1965
  • Jzchak 'EZ' Wajcman and Bill Lawrence(Willi Lorenz Stich) start Lawrence Electro-sound in Germany.
  • Pickup designs from this time period (1965 to 1968) would resurface later at Lawrence Sound Research in the late 70's

Picture

Picture



back to top
1968-72

Picture
  • Bill Lawrence(Willi Lorenz Stich) leaves Germany and Lawrence Electro-sound for the USA. Lawrence Electro-sound closes in 1970.
  • Bill Lawrence(Willi Lorenz Stich) helps out with the pickup design on Dan's Ampeg plexiglas guitars. Runs Dan Armstrong's shop. Works with Dan and son Kent, and Larry Dimarzio among others. Dan's shop at that time catered to the who's who of popular music of the day.




  • Bill Lawrence(Willi Lorenz Stich) works for Gibson, designs guitars (and the pickups for these) such as the S-1, L6-S, and Marauder.(leaves in ~1977?).  
  • Contributes to the design for the Gibson "Super-Humbucker" featured in several Gibson models in the 70's and 80's.

back to top
1975-6 Bill Lawrence Pickups (Classic)Pickups made and sold between 1975 and 1984 by Bill Lawrence(Willi Lorenz Stich).
  • Bill Lawrence(Willi Lorenz Stich) starts up Lawrence Sound Research, and opens shop in Donelson, TN.
  • Relocates in mid to late '76 to Nashville, TN.



back to top
1977 Bill Lawrence Pickups (Classic)Pickups made and sold between 1975 and 1984 by Bill Lawrence(Willi Lorenz Stich).
  • The L-90 is introduced

Picture

Picture



back to top
1979
  • The L-500 is introduced, with curved 2.150inch long blades, replacing the L-90XL

Picture



back to top
1981
  • At the request of Ronnie Montrose, Bill creates a cleaner version of the L-500L and L-500R. These new cleaner L-500's were labeled L-510L and L-510R. To avoid confusion, the L-500 and L-510 lineups are eventually merged, and by the end of '81 the L-500 lineup looked like this:
    • the L-500XL (formerly L-500L) with 9.6 Henry
    • the L-500L (formerly L-510L) with 6.9 Henry
    • the L-500R (no change) with 4.8 Henry and (aprox) 12ohm(?)
    • discontinued: the L-510R with 3.2 Henry and (aprox) 8ohm(?).

      the L-510R would eventually become the L-500C upon its reintroduction in 1994 (below)



    It would seem the L-510 lived and died in 1981. Long live the L-500!!

back to top
1982-83
  • In 1983, or very late in 1982, the "BILL LAWRENCE USA" imprint appears on the plastic housing of the L-500 pickups (and others?)
  • Following the appearance of the "BILL LAWRENCE USA" imprint, the switch is made to thinner flat blades (2.150inches) and ceramic magnets.

Picture



back to top
1984
  • Lawrence Sound Research ceases to exists.
  • From 1984 forward, there may be at any one time two manufaturers of pickups that may be refered to as "Bill Lawrence" pickups. Those would be pickups made by the trademark holder, Jzchak 'EZ' Wajcman, and those made or designed by Bill Lawrence(Willi Lorenz Stich).
  • Jzchak 'EZ' Wajcman and designer Bill Lawrence have not been affiliated since 1984.

back to top
1984   Bill Lawrence Products (EZ)Pickups made by Jzchak Wajcman after 1984. billlawrenceusa.com
1986 By Bill Lawrence (WS)This label denotes pickups made by Bill Lawrence(Willi Lorenz Stich), after 1984, including pickups from OBL Pickups and/or at billlawrence.com
  • Bill Lawrence(Willi Lorenz Stich) leaves for West Germany, starts OBL Pickups.

Picture

Picture

  • Bill Lawrence(Willi Lorenz Stich) begins using thicker and wider blades blades (still flat) on his pickups. Original pickups were made precisely for Gibson string spacing, while these could be used for Gibson or Fender style guitars. (2.225inches)

Picture



back to top

  
1987
  • Bill Lawrence(Willi Lorenz Stich) returns from Germany to help Gibson return to glory.
  • Many OBL pickups end up in guitars built by Gibsion during this time.
  • Bill designs or has a hand in designing the "Original HB-L" and "HB-R" which feature circuit board bottoms, like his OBL pickups.

back to top

  

1989
  • Bill Lawrence(Willi Lorenz Stich) parts with Gibson, leaving behind a licensing deal for the OBL name and/or pickup designs.
  • Bill maintains that the pickups sold by Gibson and/or Epiphone using the OBL name as per this arrangement do not meet his standards and/or are not of his design.

Picture

back to top
  • It is around this point that pickups made by Mr. Wajcman switch to a 'filled to the top with epoxy' design, no longer feature two screws on the bottom (late '80's early 90's).

Picture

Picture
1994
  • Bill Lawrence(Willi Lorenz Stich) re-introduces the L-510R, which, to fall in line with the 1981 renaming, was dubbed the L-500C.



Picture back to top

  
1995
  • Bill Lawrence(Willi Lorenz Stich) begins working with/for Fender on noiseless pickup designs for bass and/or guitar.

back to top

  
2002  
  • In an effort to help clear up the confusion between "bill lawrence" pickups and the new Dimebucker by Seymour Duncan, Mr. Wajcman begins using the "Bill Lawrence U.S.A." stamp on the tops of his pickups. (2000-2003?)

Picture
2003
  • Bill Lawrence(Willi Lorenz Stich) and company moves from Bethlehem, Pennsylvania, to Corona, California.

back to top

  
2004
  • Fender releases their "SCN" pickups, designed to be true to strat sound with no hum/noise, designed with help by Bill Lawrence(Willi Lorenz Stich).

back to top

  
2008
  • Both Bill Lawrence(Willi Lorenz Stich) and Jzchak 'EZ' Wajcman continue to produce pickups separately using the name Bill Lawrence in either reference or as the product and/or company name.



UPDATE May 26 2008: Currently Jzchak 'EZ' Wajcman is producing pickups using the trade mark "Bill Lawrence" and Bill Lawrence(Willi Lorenz Stich) is producing pickups with wife Becky under the names Wilde and Keystone, which carry the tag "designs by Bill Lawrence"


back to top
2013

On November 2, 2013, Will Lorenz Stich, known to the world as Bill Lawrence, passed away.



back to top





back to top

This timeline was created in an attempt to help shed light on the "when", "where", and "who" in trying to identify a Bill Lawrence pickups. I've also included some accomplishments of Bill Lawrence(Willi Lorenz Stich) to cover the "why".

My goal is to keep the statements here undisputable, and I will continue to update this page with that in mind. Unfortunately, some of the sources of information are contradictory, I've tried to mark such statements with a (?) showing that they may not be confirmed.

 

Timeline Sources:

sources include the links found here and email responses to inquiries placed to both billlawrence.com and billlawrenceusa, among many others.

    Sources updated March 2nd 2007
  • billlawrenceusa.com/
  • http://www.legacy.com/obituaries/orangecounty/obituary.aspx?n=bill-lawre...
  • billlawrenceusa.com/swampkaster/history.htm
  • billlawrence.com/Pages/BL_Gibsonarticle.htm
  • billlawrence.com/Pages/About_Bill/BL_obl.htm
  • billlawrence.com/Pages/About_Bill/Win.htm
  • en.wikipedia.org/wiki/Bill_Lawrence_(guitar_maker)
  • en.wikipedia.org/wiki/Gibson_Marauder
  • gibson.com/allaccessfeatures.aspx?aliaspath=/AllAccess/Know%20Your%20Gibson_%20Marauder%20and
  • gibson.com/allaccessfeatures.aspx?aliaspath=/AllAccess/Know%20Your%20Gibson_%20The%20L-6S
  • vintageguitar.com/brands/details.asp?ID=52
  • kentarmstrong.com/KentPage2.html
  • neelyguitars.com/Bio.html

 

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer